New, Improved DIY Powder Laundry Detergent

For quite a while now, I have made my own laundry detergent. I have been fine-tuning the recipe, and wanted to share my new, improved process.

Rather than grate the soap, I have found that if you turn it into a fine powder, it dissolves, mixes, and cleans much better. To do this, start with 1/2 bar of Ivory soap.

Unwrap it and place it into a microwave-safe pie plate or casserole dish (you want something wide).

Place it into a microwave and set the timer for 1 1/2 minutes. Watch it closely while the microwave is on - the soap will grow and expand, much like volcanic lava. When it stops growing, stop the microwave (mine usually goes for a little more than a minute).

Remove the soap from the microwave and let it cool. Once cooled, you'll be able to pull off pieces and crumble it into a fine powder, which you'll be able to easily mix with your Borax and washing soda.

It's also a fun project for kids - my daughter loves to watch the soap while it's in the microwave, and she helps crumble it afterward. Just don't let your kids inhale the fine powder, keep it down near waist level while working with it.

An Inexpensive, Easy Gift for a 60th Birthday

We'll soon attend a 60th birthday party, and everyone has been asked to bring 60 things as a gift. This could work for any birthday, but for some reason, 60 seems to be the popular number to do this sort of thing. Sure, we could take a jar of 60 jellybeans, a bag of 60 buttons, 60 postage stamps, or any number of other things. But what's the fun in that? I chose instead to make a custom, framed print of 60 words that describe the birthday girl.

Luckily, I was able to pick up a brand new float frame from our local thrift shop. I have great luck with frames there and got this one for only $7. The best part of the gift is that if she doesn't like the print, she can just replace it with photos and it's still a nice birthday present.

To make your own, here's what you'll need:

-Poster board
-Markers or pencils (I used three complimentary colors and alternated them)
-Straight edge
-Razor or scissors for cutting a straight edge

First, you'll want to decide on the size of your print. I Chose to keep the print's edges a couple of inches from the frame because I used a float frame. If you have a mat, you may want to fit it to that, or you could fill the whole frame. It's really up to you and the size of your frame.

Once you decide on the size, measure and mark your poster board accordingly. I left the poster board width as is, so I only needed to measure up each side.

I then used the straight edge to draw a line to connect my marks.

I used my razor knife to cut across the line. You could also use scissors, just ensure that you're cutting right on the line.

Once my paper was ready, I searched for an easy-to-draw font that would look good in the print. This page has a wonderful font that I found easy to use and I liked the way it looked on my page.

I came up with a list of 60 words. Thesaurus.com is an excellent resource for this, but you don't want to forget others like Mom, Daughter, Grandma, etc., as well as the person's name, when you're making your list. I kept the font list and the word list open on my screen while I worked.

I found it helpful to lightly write each word in pencil before I wrote it in marker. Since my marker colors weren't all dark, it worked best when I erased most of the pencil prior to using the marker. If you're using dark colors, you may not need to worry about that, though.

I wrote 59 of the words around the page, then saved the center area for her name, written much larger. There you have it! I framed it, and now it's ready to give. I think it turned out great, and I enjoyed doing it.

I have to warn you, though - the fancy writing took more time than I'd originally expected. I spent about 8 - 9 hours total on it, but I spread it out over the course of a few days so that it wasn't too tedious.

An Easy Gift For Your Man

It's always hard to find a good gift for a man - all the men in my life buy something the minute they want it. My husband was in need of a small box to place the items from his pockets at the end of each day, though, and I was lucky enough to find this pretty wooden box at a local thrift store.

It was in great shape but had a couple of nicks and scratches in the wood. I wish I'd taken a before picture, so you could see how easy those were to fix using Restor-a-finish by Howard. 

I can't say enough good things about this stuff - it rocks. I use it for any real wood - on our bedroom furniture, dining room table, wooden trim on the stairs...it really just works great, with no sanding or refinishing. 

I cleaned up the inside of the box using a lint roller, and I added a photo of my daughter and me to the little indented spot in the lid, for a personal touch.

We gave it to my husband for his birthday, and it was a big hit!

How to Stuff a Large Pillow on the Cheap

I recently came into some good-sized fabric scraps, and thought they'd make nice sofa pillows for our den. Our sofa is a dark brown, and the walls are painted a very light green. The fabric, striped with shades of taupe, blues, and greens, brought the two together nicely.

Polyfill, or any type of fiberfill, can cost a fortune - anywhere from $10 - $20 a bag. The large pillows I made here would have taken 5 - 10 bags, which would have made these pillows much more pricey than I would like. Instead of purchasing filler, I decided to look around our house for alternative stuffing to see if I could find anything usable. My pack-rat habits paid off for once!

I had a large bin of fabric scraps which were mostly sweater pieces. Many were wool sweaters that I'd felted. Others were leftover sleeves and t-shirt pieces left from long-finished projects. I decided the sweaters were ideal because they were bulky but not too heavy.

I sewed the fabric as I normally would to make a pillow: with right sides together, sew three sides along the edge, then sew the fourth side partially, leaving an opening wide enough to stuff the insides. Turn right sides out, then start stuffing.

I didn't quite have enough sweaters to completely fill both pillows, so I finished off the rest with an old mattress cover and the contents of an old bed pillow.

Once the pillows were stuffed, I hand-stitched them closed, and they were done! We love having them on the sofa - it really does make the sofa more comfy, and I love how they brighten up the room.

One drawback: these pillows are heavier than they would have been with fiberfill. However, given the fact that I ended up with huge, great-looking pillows for free, I don't mind it at all!

How to Make Mobile Indoor/Outdoor Speakers

My family recently thought it would be a good idea to install some outdoor speakers so we could enjoy music when we're in the pool or out on the deck, but the more we looked into it, the more we thought it would be easier, and more useful, if we pulled together a solution that would allow us to use them anywhere (well, within our Wi-fi reach, at least).

My husband came up with the idea of using Apple's Airport Express to allow us to play music from our iTunes (from the laptops, PC, iPads, or iPhones, or iPods if you have them). From there, we found some speakers that we liked, but they weren't very mobile. We thought it would be fun to be able to move them outside when we're in the pool or yard, and inside when we want to use the speakers in a room where we normally wouldn't be able to hear our computers' built-in speakers.

I came up with a solution that uses all of the above, but in a small, rolling suitcase.

What You'll Need:
-Apple Airport Express
-Power strip or surge protector
-Rolling fabric suitcase
-Computer speakers (We used the Logitech Z313 speaker system)

It was really easy to set up: all I did was connect the components and place them into the suitcase. We were lucky and had this older, small, rolling suitcase up in our closet. It's covered in fabric, so it doesn't muffle the noise noticeably, but that means it isn't waterproof, so we'll need to be extra careful to remember to roll it all in when we're finished.

My first step was to make sure everything worked: I plugged it in and tested it, and everything sounded great.

Luckily, this suitcase had a piece of fabric that connected to the bottom with velcro, and this was handy in keeping the smaller speakers from moving around.

So, I tucked the smaller speakers under the fabric and used the velcro to hold them in place.

Then, I added the other components, heaviest on the bottom. Make sure the power strip is in the ON position so you won't have to open the zipper each time you use it.

I left the plug outside the suitcase, since it will need to be plugged in each time we use it. Since this speaker set also had a volume control, I also left it hanging outside and zipped around it. However, if you choose a speaker system that doesn't have a separate volume control, you can still use iTunes to control the speaker volume.

That's it! It's now ready to roll around and be used. I'm so excited to be able to listen to some decent tunes this summer while we enjoy the warm weather.

To use them, roll into place, plug it in, then go to your iTunes console, and click the speaker option (lower right of the screen - the rectangle shape). Select "Airport Express", and the output will be redirected to your Airport Express, wherever it may be.

And here it is on our deck, beside the hot tub. It sounds great!

This solution will be so handy for our 4th of July cook out - I can't wait!

How to Make Your Own Deodorant

I have been making my own deodorant for two years now. I see several benefits to it:

• It's cheaper then buying commercial deodorant / antiperspirant
• Less waste (no more little blue plastic containers to throw away - and anything that reduces plastic waste is a good thing)
• I never run out, as long as my ingredients are well stocked (and they always are)
• Fewer chemicals on and in my body. There is a great deal of Internet debate about whether or not the chemicals in deodorant and antiperspirants cause cancer and/or Alzheimer's, but whether or not it's true, I'd rather not take the chance...especially if I have a natural alternative that works just as well as the commercial solutions.

What You'll Need:

-Coconut Oil (available in the baking aisle of most supermarkets)

-Corn Starch

-Air-tight container for storage

-Baking Soda (optional)

-Tea Tree Oil or lavender oil (optional)

I find it's easiest to mix if you first melt the coconut oil in the microwave. I remove the jar's lid and microwave on high for 2 minutes until most of it is melted.

My preferred recipe is simply 1/2 C. Corn Starch and 4 Tbsp. Coconut oil, mixed together and stored at room temperature. I apply it with my fingers and it works well for me, even in the Summer. 

If that doesn't work for you, an alternative recipe would be 1/4 C. Corn Starch, 1/4 C. Baking Soda, and 4 Tbsp. Coconut oil. If that still doesn't control odors, you can add 10 drops of Tea Tree or Lavender oil to the mixture. 

Store in an airtight container and just mix more when you need it. I also use a little travel size container (that used to contain eye cream) for traveling.

This is a deodorant only, not an antiperspirant, so you'll still sweat (but you shouldn't stink). If I was a teenager, though, I'm not sure this would be a good solution, but since I'm older and don't sweat as much as I used to, this works great for me. 

Another important note - sometimes it takes a couple of weeks for your sweat glands to adjust to not being squelched by a commercial antiperspirant. So, if you feel like this isn't working because you're so sweaty, try giving it 10 days or so to see if your body adjusts. It really is worth it!

Quick and Easy Father's Day Crafts for Dads and Grandpas

It's nearly Father's Day, and if the men in your life are anything like mine, they already have everything they need. This leaves me searching for new ideas every year. Here are a couple of gifts we have made that the Dads and Grandpas loved:

Battery Garden


One Christmas, we gave my father-in-law a pack of batteries to power a new lantern that was separately wrapped. He opened the batteries first and went on and on about how he loved them and always needed batteries. Even after he opened the lantern, he told us how much he loved the batteries. So, it made me realize that men really do always need batteries, so why not make a cute little garden out of them and give them as a gift? My four-year-old decorated it herself and it was a fun project. I just helped cut holes in the boxes to hold the sticks, and added a little glue at their bases to hold the heavier batteries.

She had fun making it, and the Grandfathers both thought it was really cute. Be sure to tell them that they're new batteries so they'll be able to use them!

Painted T-shirts with Hand Prints and Footprints


Painted T-shirts are are a fun and simple gift, and my daughter always loves getting paint all over her, so be sure to wear old clothes if you make them! All you need is fabric paint (available at most craft stores) and plain T-shirts (they're cheaper at Wal-Mart, Dollar General, or a similar store than they are at craft stores).

Here are a few hand print / footprint designs:

"World's Best Daddy, Hands Down" with hand prints

"Best Granddaddy, Hands Down" with hand prints 

"My Granddaughter Walks All Over Me" with footprints

The best part of painting your own T-shirts is that you can customize them with whatever you call the Dads and Grandfathers in your life: Papa, Papaw, Grandpa, etc. Then, there's the added bonus of just getting messy with paint, so have fun with it!

How to Make a Quick, Easy, and Inexpensive Light Box

If you sell small things online, you could probably benefit from a light box in which to take your pictures. By using a light box and a free web-based photo editing site, you'll get pictures that are clean, crisp, and eye-catching to prospective buyers.

It really doesn't take much to make a simple light box. I used a cardboard box, cut the front panel along the right and left sides so that it is open to the front, and covered it loosely with white fabric (I used muslin, but you could use any smooth fabric).

A quick peek under the hood reveals...

It's a USPS flat rate box, which are available free (Free!) from the U.S. postal service. I love these boxes for shipping - this is one of the smartest things that has come out of the postal service in years. And in this case, the large sized box makes a perfect light box for me.

I topped off my cheap and easy light box with a small halogen desk lamp.

I think my husband originally purchased it from IKEA, but any small lamp would do. This lamp works well because the halogen is nice and bright, and the light is targeted and shines straight down into the box.

Once you take your pictures, you can use free online editing sites to crop and adjust the photos to look better. I love the Fotofuze site for this - it's easy to turn photos like this:

Into this:

I love how Fotofuze removes everything but the item and its shadow. It's also super easy to use! It's designed to work with Etsy, but it's easy to download the modified photo and then upload it to any other site, not just Etsy. Best of all, it's free! There are other free photo editing sites out there, but in my experience, Fotofuze is the easiest way to remove anything in the background as long as the background is white or black.

Make Your Own Laundry Detergent

If you're looking for easy ways to save money on household items, one easy way you can do so is to make your own laundry detergent. I started making my own a little over 2 years ago because the commercial detergents' scents were too strong for me, and the "Free" products were expensive. This recipe works well in our front-loading machine. It cleans well (I do still use Oxyclean spray to pre-treat heavy stains, but everything else comes right out), has a very light scent, and is easy to make. Plus, I love the fact that as long as I'm well-stocked on the ingredients, I never run out - I just make more when I need it!

What You'll Need:
-2 cups Arm & Hammer Super Washing Soda (in the laundry aisle, but regular baking soda works if you can't find it)
-2 cups Borax
-1 bar Ivory soap
-Air-tight storage container

First, grate the bar of soap.

Then, add the Washing Soda and Borax. Mix it all together.

Transfer the mixture to air-tight storage, and that's it! I use 4 Tbsp. of this powder in our small front-loader. If you have a larger machine, you may want to try a little more.

DIY Reusable Swiffer Cloths

We recently replaced the carpet in our den with laminate flooring. It looks great, but with 3 pets and a preschooler, I found myself in need of something to quickly and easily clean it every day or so. I picked up a Swiffer Sweeper and loved how easy it was to use (the preschooler loves to use it, too!).

It came with samples of both the dry and wet cloths. Between the vinyl flooring in our kitchen and the laminate in our den, we quickly used them all. I fell into the marketing trap and picked up a package of each the next time I went to the grocery store.

Once I got home and started using the packages (and, of course, tossing the used cloths into the trash), I realized that I could most likely find a reusable solution for the cloths. Thankfully it wasn't too hard!

I picked up a pack of utility dishcloths that are perfect! I was able to get this 9-pack for $3, and they should last a long, long time.

I can use them dry to pick up dust or pet hair, or I can lightly spray them with a vinegar/water mixture for light cleaning. When I'm finished, I just toss them into the wash and they're ready to use again.

For wet cloths, I put a few of them into the empty Swiffer Wet cloths container and added some of the vinegar/water solution. Whenever I want to mop the kitchen or bath, I just pull one out, wring out the extra water, and it works great.

I'm sometimes bothered by scented products, and I hadn't been able to find an unscented version of Swiffer's wet cloths. So this solution also solves that issue!